This 3" Schedule 80 seamless pipe, crafted from high-performance Titanium Grade 5 (Ti-6Al-4V), offers exceptional strength-to-weight ratio and superior corrosion resistance for demanding environments.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Pipe Size | 3.0" |
| Outside Diameter | 3.729" |
| Wall Thickness | 0.249" |
Engineered for reliability and performance, this 3.0" IPS Schedule 80 seamless pipe features a precise 3.729" outside diameter and a robust 0.249" wall thickness. Fabricated from Titanium Grade 5 (Ti-6Al-4V), it boasts excellent tensile strength (min 130 ksi) and yield strength (min 120 ksi) at a remarkably low density (0.160 lb/in³). Its biocompatibility and resistance to a wide range of corrosive media, including saltwater, chlorides, and many acids, make it ideal for aerospace, marine, medical, and chemical processing industries.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper end preparation, including deburring and beveling if required by welding procedure. 2. Clean all mating surfaces and the interior of the pipe to remove any contaminants. 3. Align the pipe sections accurately and secure with appropriate fixturing before welding.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Inadequate cleaning of the pipe surface before welding. | Thoroughly degrease and remove any oxides or foreign matter from the pipe ends and weld joint area using approved methods. |
| Using incorrect welding consumables or procedures for Titanium Grade 5. | Consult and adhere strictly to certified welding procedures (WPS) and use only recommended filler metals and inert gas shielding (e.g., Argon). |
A: This Seamless Pipe, Schedule 80 is manufactured from Titanium Grade 5.
A: Aerospace structural components and fluid lines, Marine and offshore oil & gas equipment, Chemical processing and handling systems, Biomedical implants and surgical instruments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||