Engineered for extreme performance, this Grade 5 Titanium seamless pipe offers unparalleled corrosion resistance and high strength. Its Schedule 80 wall thickness ensures robust integrity in demanding applications.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Pipe Size | 2.3" |
| Outside Diameter | 3.573" |
| Wall Thickness | 0.349" |
Built to exacting engineering tolerances, this seamless pipe features a nominal size of 2.3 inches, an outside diameter of 3.573 inches, and a precise wall thickness of 0.349 inches, conforming to ASTM B338 standards. Fabricated from Titanium Grade 5 (Ti-6Al-4V), it exhibits a minimum tensile strength of 130 ksi and yield strength of 120 ksi, with excellent biocompatibility and resistance to aggressive media, making it ideal for aerospace, medical implants, and chemical processing.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper cleaning and deburring of pipe ends. 2. Utilize approved welding procedures for Titanium Grade 5, such as TIG welding with a suitable inert gas shield. 3. Verify joint integrity through non-destructive testing (NDT) as per project specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect welding consumables or gas shielding. | Always use filler metals specifically rated for Titanium Grade 5 and ensure complete inert gas coverage during welding to prevent embrittlement. |
| Inadequate surface preparation before welding. | Thoroughly degrease and mechanically clean the weld area to remove any oxides or contaminants that could compromise weld quality. |
A: This Seamless Pipe, Schedule 80 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, High-pressure chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||