High-performance Grade 5 Titanium seamless pipe, Schedule 40, with a 4.817" OD and 0.124" wall. Engineered for exceptional corrosion resistance and superior strength-to-weight ratio in critical environments.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Pipe Size | 5.9" |
| Outside Diameter | 4.817" |
| Wall Thickness | 0.124" |
Specified by design engineers worldwide, this 5.9" nominal pipe size seamless titanium pipe, with an actual outside diameter of 4.817" and a Schedule 40 wall thickness of 0.124", is manufactured from Titanium Grade 5 (Ti-6Al-4V). This alloy offers an optimal balance of high tensile strength, excellent fracture toughness, and outstanding corrosion resistance, particularly in oxidizing and chloride environments. Its low density makes it ideal for aerospace, marine, and chemical processing applications where weight reduction and material integrity are paramount. Meets ASTM B338 standards for seamless titanium tubing.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all mating surfaces are clean and free of contaminants. 2. Carefully align pipe ends and employ appropriate welding procedures for titanium alloys, such as TIG welding under inert gas shielding (argon). 3. Inspect all welds for integrity and conformance to applicable codes and standards.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using improper welding techniques for titanium. | Employ TIG welding with a robust inert gas purge (argon) to prevent contamination and maintain the alloy's properties. |
| Failing to properly clean pipe ends before welding. | Thoroughly degrease and mechanically clean the pipe ends to remove any oxides or surface impurities that could compromise weld quality. |
A: This Seamless Pipe, Schedule 40 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Chemical processing equipment, Marine environments and offshore structures, Medical implants and devices.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||