This 3.5-inch Schedule 40 seamless pipe, crafted from Titanium Grade 5, offers exceptional strength and corrosion resistance. Its precise dimensions ensure optimal flow and structural integrity in demanding environments.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Passivated |
| Grade | N/A |
| Pipe Size | 3.5" |
| Outside Diameter | 6.552" |
| Wall Thickness | 0.126" |
Engineered for reliability and performance, this 3.5-inch Schedule 40 seamless pipe boasts a 6.552-inch outside diameter and a 0.126-inch wall thickness. Manufactured from Titanium Grade 5 (Ti-6Al-4V), it exhibits a superior strength-to-weight ratio, excellent fatigue strength, and remarkable resistance to saltwater corrosion and aggressive chemicals. This makes it a preferred choice for high-pressure applications in aerospace, marine, medical implants, and the chemical processing industries where material integrity under extreme conditions is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all mating surfaces are clean and free of debris. 2. Properly align pipe ends and welding fixtures. 3. Execute weld according to established TIG welding procedures for Titanium Grade 5, utilizing a purge gas for internal protection.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel welding techniques on titanium. | Employ specialized TIG welding procedures for titanium, including inert gas purging (argon) for both sides of the weld joint to prevent oxidation and embrittlement. |
| Inadequate surface preparation before welding. | Thoroughly degrease and mechanically clean (e.g., stainless steel brush) all welding areas to remove any contaminants that could compromise weld quality. |
A: This Seamless Pipe, Schedule 40 is manufactured from Titanium Grade 5.
A: Aerospace components, Marine hardware and piping, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||