This Schedule 40 seamless pipe, fabricated from robust Titanium Grade 5, offers exceptional strength-to-weight ratio and superior corrosion resistance for critical applications.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Pipe Size | 3.3" |
| Outside Diameter | 5.855" |
| Wall Thickness | 0.331" |
Specified by design engineers worldwide, this Titanium Grade 5 seamless pipe adheres to stringent performance requirements. With a nominal pipe size of 3.3 inches, it features a precise outside diameter of 5.855 inches and a substantial wall thickness of 0.331 inches. This composition ensures high tensile and yield strength, excellent fatigue resistance, and biocompatibility, making it a preferred choice for environments demanding extreme durability and resistance to chemical attack, such as in the aerospace, medical implant, and chemical processing industries.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper alignment and support for the pipe during installation. 2. Utilize approved welding procedures and filler materials suitable for Titanium Grade 5. 3. Conduct thorough inspection and testing, including non-destructive testing, to verify joint integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cleaning of the pipe ends before welding, leading to contamination and weld defects. | Thoroughly degrease and mechanically clean the weld joint area using non-ferrous brushes and appropriate solvents. |
| Failure to maintain a stable inert gas shield during welding, causing oxidation and embrittlement. | Utilize adequate argon or helium shielding gas flow rates and ensure proper torch positioning to maintain a consistent protective atmosphere. |
A: This Seamless Pipe, Schedule 40 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||