This Schedule 40 seamless pipe, crafted from high-performance Titanium Grade 5, offers exceptional strength-to-weight ratio and superior corrosion resistance, ideal for demanding industrial applications.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Pipe Size | 2.6" |
| Outside Diameter | 5.626" |
| Wall Thickness | 0.398" |
Built to exacting engineering tolerances, this 2.6" nominal pipe size (NPS) seamless pipe features a 5.626" outside diameter and a precise 0.398" wall thickness. Manufactured from Titanium Grade 5 (Ti-6Al-4V), it exhibits an ultimate tensile strength of approximately 130 ksi and a yield strength of 120 ksi, coupled with outstanding fatigue strength and saltwater corrosion resistance. Its biocompatibility and lightweight properties also make it suitable for specialized medical and aerospace applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper pipe end preparation and beveling according to welding procedure. 2. Utilize appropriate titanium welding consumables and inert gas shielding (e.g., Argon). 3. Perform non-destructive testing (NDT) on completed welds to verify integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper heat treatment during welding, leading to embrittlement. | Adhere strictly to recommended welding parameters and post-weld heat treatment cycles for Titanium Grade 5. |
| Contamination of weld area with oxygen or nitrogen, causing loss of ductility. | Maintain a high-purity inert gas shield throughout the entire welding process. |
A: This Seamless Pipe, Schedule 40 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Chemical processing equipment, Medical implants and devices.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||