This Schedule 40 seamless pipe, crafted from Titanium Grade 5, offers superior strength-to-weight ratio and unparalleled corrosion resistance. Ideal for extreme environments and critical applications.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Pipe Size | 2.1" |
| Outside Diameter | 3.310" |
| Wall Thickness | 0.178" |
Manufactured under strict quality controls, this Titanium Grade 5 seamless pipe adheres to rigorous industry standards. With a nominal pipe size of 2.1 inches, it features an actual outside diameter of 3.310 inches and a substantial wall thickness of 0.178 inches, corresponding to Schedule 40. Titanium Grade 5 (Ti-6Al-4V) provides an exceptional combination of high strength, low density, and excellent corrosion resistance, making it suitable for aerospace, medical implants, marine, and chemical processing industries where performance under stress and exposure to aggressive media is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all mating surfaces are clean and free of debris. 2. Apply appropriate thread sealant or tape to the male threads. 3. Tighten fittings securely, avoiding over-tightening which can damage the titanium. 4. Perform leak testing after installation to verify integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible fittings or sealants. | Always use fittings and sealants specifically rated for titanium and the intended service conditions. |
| Exceeding recommended torque values during assembly. | Consult manufacturer specifications for recommended torque settings to prevent material deformation or damage. |
A: This Seamless Pipe, Schedule 40 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Chemical processing equipment, Marine hardware and offshore structures, High-performance automotive exhaust systems, Biomedical implants and devices.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||