Engineered for extreme environments, this Schedule 40 seamless pipe, crafted from Titanium Grade 5, offers exceptional corrosion resistance and high tensile strength. Its precise dimensions ensure optimal performance in critical systems.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Pipe Size | 1.9" |
| Outside Diameter | 3.909" |
| Wall Thickness | 0.137" |
Trusted by engineers across multiple sectors, this Titanium Grade 5 seamless pipe meets rigorous performance demands. With a nominal pipe size of 1.9 inches, it features an actual outside diameter of 3.909 inches and a robust wall thickness of 0.137 inches, adhering to Schedule 40 specifications. The Ti-6Al-4V alloy provides superior strength-to-weight ratio, excellent fatigue strength, and outstanding resistance to saltwater and a wide range of aggressive chemicals, making it ideal for aerospace, marine, and chemical processing industries.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all mating surfaces are clean and free from debris. 2. Apply approved sealant or tape to the threads of the male fitting. 3. Tighten the connection to the manufacturer's specified torque, avoiding over-tightening which can damage the pipe or fitting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible welding consumables for Titanium Grade 5. | Always use filler metals specifically rated for Ti-6Al-4V alloy to maintain material integrity and corrosion resistance. |
| Improper heat treatment after welding, leading to embrittlement. | Follow recommended post-weld heat treatment procedures for Titanium Grade 5 to relieve stresses and prevent hydrogen embrittlement. |
A: This Seamless Pipe, Schedule 40 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Chemical processing equipment, Marine hardware and piping systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||