This Titanium Grade 5 seamless pipe, Schedule 160, is engineered for the most demanding industrial applications, offering exceptional strength, lightweight design, and unparalleled corrosion resistance.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Zinc Plated |
| Grade | N/A |
| Pipe Size | 5.4" |
| Outside Diameter | 1.110" |
| Wall Thickness | 0.190" |
Purpose-built for heavy-duty applications, this 5.4" nominal pipe size (NPS) seamless pipe boasts a precise 1.110" outside diameter and a robust 0.190" wall thickness, adhering to Schedule 160 specifications. Fabricated from Titanium Grade 5 (Ti-6Al-4V), it delivers an optimal balance of high strength-to-weight ratio, superior tensile strength, and exceptional fatigue resistance. Its inherent passivation layer provides outstanding immunity to a wide spectrum of corrosive media, including saltwater, chemicals, and oxidizing agents, making it ideal for aerospace, marine, chemical processing, and high-performance fluid systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper pipe alignment and support to prevent undue stress. 2. Utilize approved titanium welding procedures and filler materials for any necessary joint fabrication. 3. Conduct thorough hydrostatic or pneumatic testing as per project specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper joint preparation leading to weld defects. | Thoroughly clean and bevel pipe ends using dedicated titanium tooling to achieve a clean, consistent joint for welding. |
| Using incompatible welding consumables. | Always employ certified titanium filler metals specifically recommended for Titanium Grade 5 to ensure weld integrity and matching properties. |
A: This Seamless Pipe, Schedule 160 is manufactured from Titanium Grade 5.
A: Aerospace structural components and hydraulic lines, Marine environments and offshore oil & gas, Aggressive chemical processing and petrochemical plants.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||