This Schedule 160 seamless pipe, crafted from high-strength Titanium Grade 5, offers exceptional corrosion resistance and a robust profile. Engineered for demanding applications requiring superior performance under extreme conditions.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Pipe Size | 3.8" |
| Outside Diameter | 3.309" |
| Wall Thickness | 0.464" |
Manufactured under strict quality controls, this 3.8" internal diameter (ID) seamless pipe exhibits a precise outside diameter (OD) of 3.309" and a substantial wall thickness of 0.464", conforming to Schedule 160 specifications. Composed of Titanium Grade 5 (Ti-6Al-4V), it boasts a minimum tensile strength of 128,000 psi and a yield strength of 120,000 psi, coupled with excellent biocompatibility and resistance to a wide array of corrosive media. This combination makes it ideal for critical fluid conveyance in aerospace, chemical processing, and marine environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material compatibility and cleanliness of mating components. 2. Ensure proper alignment and use of approved welding or joining techniques for Titanium Grade 5. 3. Conduct thorough pressure testing and non-destructive examination as per project specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel welding procedures. | Employ specialized welding procedures and inert gas shielding (e.g., Argon) for Titanium Grade 5 to prevent contamination and maintain material integrity. |
| Inadequate surface preparation before joining. | Thoroughly degrease and mechanically clean all surfaces to be joined to remove any oxides, oils, or contaminants that could compromise the weld quality. |
A: This Seamless Pipe, Schedule 160 is manufactured from Titanium Grade 5.
A: Aerospace structural components and hydraulic lines, High-pressure chemical processing equipment, Marine hardware and subsea systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||