Engineered for extreme conditions, this Titanium Grade 5 seamless pipe (Schedule 160, 3.5" OD) offers exceptional strength-to-weight ratio and unparalleled corrosion resistance.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Pipe Size | 3.5" |
| Outside Diameter | 2.249" |
| Wall Thickness | 0.486" |
Manufactured under strict quality controls, this seamless pipe is constructed from Titanium Grade 5 (Ti-6Al-4V), a high-strength alpha-beta alloy renowned for its excellent mechanical properties and biocompatibility. With an outside diameter of 2.249" and a robust wall thickness of 0.486" conforming to Schedule 160, it is engineered to withstand extreme pressures and corrosive media. This material composition ensures superior performance in aerospace, marine, and chemical processing industries where reliability and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper alignment and support of the pipe section. 2. Utilize approved welding procedures and qualified personnel for joining, ensuring complete penetration and minimal contamination. 3. Conduct thorough post-weld inspection, including visual and non-destructive testing, to verify weld integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Inadequate post-weld cleaning, leading to potential surface contamination and reduced corrosion resistance. | Thoroughly clean all weld areas with appropriate solvents and brushes immediately after welding, removing any slag, spatter, and heat tint. |
| Using incorrect welding consumables or parameters, resulting in compromised weld strength and ductility. | Always refer to the material's welding data sheet and use consumables specifically designed for Titanium Grade 5, adhering to recommended preheat and interpass temperatures. |
A: This Seamless Pipe, Schedule 160 is manufactured from Titanium Grade 5.
A: Aerospace structural components, High-pressure marine piping systems, Chemical and petrochemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||