Engineered for extreme environments, this Titanium Grade 5 seamless pipe offers exceptional strength-to-weight ratio and superior corrosion resistance, ensuring reliable performance in critical systems.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Galvanized |
| Grade | N/A |
| Pipe Size | 1.5" |
| Outside Diameter | 4.870" |
| Wall Thickness | 0.284" |
Specified by design engineers worldwide, this seamless pipe is manufactured from Titanium Grade 5 (Ti-6Al-4V), renowned for its high tensile strength (130 ksi min) and excellent fatigue resistance. The 1.5" nominal size boasts an actual outside diameter of 4.870" and a robust Schedule 160 wall thickness of 0.284", providing exceptional pressure handling capabilities. Its biocompatibility and resistance to saltwater, chlorides, and aggressive chemicals make it ideal for aerospace, marine, and chemical processing industries.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean and free from debris. 2. Utilize appropriate titanium welding procedures and filler materials for joining. 3. Hydrostatically test the installed system to verify integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel welding techniques on titanium. | Employ specialized titanium welding practices, including inert gas shielding and proper pre/post-weld heat treatment, to prevent contamination and embrittlement. |
| Exposing titanium to excessive heat during fabrication. | Minimize heat input during bending, cutting, or welding to maintain the material's mechanical properties and prevent loss of corrosion resistance. |
A: This Seamless Pipe, Schedule 160 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Offshore oil and gas exploration, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||