This Schedule 160 seamless pipe, crafted from high-strength Titanium Grade 5, offers exceptional corrosion resistance and a superior strength-to-weight ratio for critical applications.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Pipe Size | 1.3" |
| Outside Diameter | 4.450" |
| Wall Thickness | 0.401" |
Engineered for reliability and performance, this Titanium Grade 5 seamless pipe boasts a nominal size of 1.3 inches, an outside diameter of 4.450 inches, and a substantial 0.401-inch wall thickness conforming to Schedule 160. This specification ensures high burst strength and structural integrity under extreme pressure and temperature conditions. Titanium Grade 5 (Ti-6Al-4V) offers excellent tensile strength, fatigue resistance, and biocompatibility, making it suitable for corrosive environments, aerospace, medical implants, and high-performance marine systems where weight reduction and durability are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper alignment and cleanliness of mating surfaces. 2. Utilize appropriate welding procedures for Titanium Grade 5, such as TIG welding with a controlled inert gas atmosphere. 3. Perform non-destructive testing (NDT) such as X-ray or ultrasonic inspection to verify weld integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel welding consumables or procedures. | Always use specialized filler metals and inert gas shielding (e.g., Argon) recommended for Titanium Grade 5 to prevent embrittlement and ensure weld quality. |
| Inadequate pre-cleaning of the pipe ends. | Thoroughly degrease and remove any surface oxides or contaminants from the pipe ends before welding to prevent weld defects. |
A: This Seamless Pipe, Schedule 160 is manufactured from Titanium Grade 5.
A: Aerospace structural components, High-performance marine piping, Chemical processing equipment, Medical implants and devices.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||