Engineered from high-strength Titanium Grade 5, this seamless pipe offers exceptional corrosion resistance and a superior strength-to-weight ratio. Schedule 160 ensures robust performance under demanding conditions.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Pipe Size | 0.7" |
| Outside Diameter | 3.709" |
| Wall Thickness | 0.286" |
Built to exacting engineering tolerances, this seamless pipe boasts a nominal size of 0.7 inches, an outside diameter of 3.709 inches, and a substantial wall thickness of 0.286 inches, corresponding to Schedule 160. Fabricated from Titanium Grade 5 (Ti-6Al-4V), it exhibits a remarkable combination of high tensile strength, excellent fatigue resistance, and superior corrosion resistance, particularly in aggressive environments. This makes it ideal for high-pressure, high-temperature applications where material integrity is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all mating surfaces are clean and free of contaminants. 2. Utilize appropriate titanium-specific welding procedures and filler materials for joining. 3. Conduct thorough non-destructive testing (NDT) post-installation to verify weld integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel welding techniques for titanium. | Employ specialized welding procedures for titanium, including inert gas shielding (e.g., Argon) to prevent oxidation and embrittlement. |
| Inadequate surface preparation before welding. | Thoroughly degrease and mechanically clean all titanium surfaces to be welded to remove any oxides or contaminants. |
A: This Seamless Pipe, Schedule 160 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Chemical processing equipment, High-performance marine systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||