This high-strength Titanium Grade 5 seamless pipe, Schedule 160, offers exceptional corrosion resistance and mechanical properties. Its robust construction ensures reliability in the most challenging industrial and aerospace applications.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Zinc Plated |
| Grade | N/A |
| Pipe Size | 0.6" |
| Outside Diameter | 5.329" |
| Wall Thickness | 0.270" |
Manufactured under strict quality controls, this seamless pipe boasts a nominal pipe size of 0.6 inches, an actual outside diameter of 5.329 inches, and a substantial wall thickness of 0.270 inches, conforming to Schedule 160. Fabricated from Titanium Grade 5 (Ti-6Al-4V), it exhibits superior tensile strength, fatigue resistance, and excellent performance across a wide temperature range. This material's biocompatibility and inertness make it suitable for critical fluid transfer in aerospace, medical, and chemical processing industries where purity and integrity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper joint preparation and cleaning of both pipe ends and fittings. 2. Utilize approved welding procedures and qualified personnel for joining, adhering to relevant industry standards. 3. Conduct thorough non-destructive testing (NDT) to verify weld integrity and material soundness.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Inadequate weld filler material selection for Titanium Grade 5. | Always use filler materials specifically recommended and certified for Ti-6Al-4V to ensure optimal mechanical properties and prevent embrittlement. |
| Contamination of the weld zone with oxygen, nitrogen, or moisture. | Employ inert gas shielding (e.g., Argon) with sufficient flow rates during welding and post-weld cooling to prevent atmospheric contamination and maintain material integrity. |
A: This Seamless Pipe, Schedule 160 is manufactured from Titanium Grade 5.
A: Aerospace structural components and fluid systems, Chemical processing equipment and heat exchangers, High-performance marine and offshore applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||