This high-strength, corrosion-resistant seamless pipe is fabricated from Titanium Grade 5. Engineered for demanding industrial applications, it provides exceptional durability and a lightweight profile.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Zinc Plated |
| Grade | N/A |
| Pipe Size | 3.3" |
| Outside Diameter | 1.961" |
| Wall Thickness | 0.233" |
A high-performance industrial component, this seamless pipe boasts a 3.3" nominal pipe size with a precise 1.961" outside diameter and a robust 0.233" wall thickness, conforming to Schedule 40 standards. Constructed from Titanium Grade 5 (Ti-6Al-4V), it offers an unparalleled combination of high strength-to-weight ratio, excellent corrosion resistance in aggressive media, and good weldability. Its exceptional biocompatibility also makes it suitable for specialized applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all mating surfaces are clean, free from debris, and properly aligned. 2. Apply appropriate sealant or gasket material as per application requirements. 3. Securely tighten all connections using calibrated torque wrenches to prevent over or under-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect welding procedures for Titanium Grade 5. | Employ inert gas shielding (e.g., Argon) during welding to prevent atmospheric contamination and embrittlement. Consult specific welding standards for Ti-6Al-4V. |
| Inadequate cleaning of the pipe ends before joining. | Thoroughly degrease and mechanically clean pipe ends to remove any surface contaminants that could compromise weld integrity or seal formation. |
A: This Seamless Pipe, Schedule 40 is manufactured from Titanium Grade 5.
A: Aerospace component manufacturing, Chemical processing equipment, Medical implants and devices.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||