This high-performance Titanium Grade 5 seamless pipe offers exceptional strength-to-weight ratio and superior corrosion resistance, ensuring reliability in the most demanding industrial applications.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Pipe Size | 2.0" |
| Outside Diameter | 4.089" |
| Wall Thickness | 0.260" |
Trusted by engineers across multiple sectors, this Titanium Grade 5 seamless pipe (2.0" nominal size, 4.089" OD, 0.260" wall thickness, Schedule 160) leverages the inherent properties of Ti-6Al-4V alloy. Its excellent biocompatibility, high tensile strength (exceeding 130 ksi), and remarkable fatigue strength make it ideal for critical applications. The material's resistance to chloride-induced corrosion, pitting, and crevice corrosion, even in aggressive environments, is a key advantage. Designed for high-pressure and elevated temperature service, it meets stringent industry requirements for aerospace, medical implants, and chemical processing.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper pipe preparation, including deburring and cleaning. 2. Utilize appropriate welding procedures and filler materials for Titanium Grade 5, such as inert gas shielding (e.g., Argon) to prevent oxidation. 3. Perform post-weld inspection and testing to verify weld integrity and material compliance.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel welding practices with titanium. | Always use specialized procedures and inert gas shielding to prevent embrittlement and oxidation of the titanium weld zone. |
| Inadequate cleaning of the pipe ends prior to welding. | Thoroughly degrease and mechanically clean the pipe ends to remove any surface contaminants that could compromise weld quality. |
A: This Seamless Pipe, Schedule 160 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Chemical processing equipment, Biomedical implants and devices.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||