Engineered from premium Titanium Grade 5, this seamless pipe delivers exceptional strength and corrosion resistance for demanding industrial uses.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Zinc Plated |
| Grade | N/A |
| Pipe Size | 4.7" |
| Outside Diameter | 2.135" |
| Wall Thickness | 0.445" |
Purpose-built for heavy-duty applications, this seamless pipe boasts superior mechanical properties derived from its Ti-6Al-4V composition, offering an outstanding strength-to-weight ratio and excellent fatigue strength. The precise 4.7" outside diameter and 0.445" wall thickness conforming to Schedule 40 standards ensure compatibility with standard fittings and robust performance under extreme pressure and temperature fluctuations. Its inherent biocompatibility and resistance to a wide range of corrosive media make it suitable for aerospace, chemical processing, marine, and medical device manufacturing.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper beveling of pipe ends to match fitting preparation. 2. Utilize specialized welding procedures (e.g., Gas Tungsten Arc Welding - GTAW) with inert gas shielding (Argon or Helium). 3. Perform thorough post-weld cleaning and inspection to guarantee joint integrity and corrosion resistance.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel welding consumables. | Employ titanium-specific welding rods and filler materials to prevent contamination and embrittlement. |
| Inadequate purging with inert gas. | Ensure a complete and consistent inert gas purge on both the inside and outside of the weld zone to prevent oxidation and porosity. |
A: This Seamless Pipe, Schedule 40 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Chemical processing equipment, Marine propulsion systems, High-pressure fluid transfer.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||