This Titanium Grade 5 seamless pipe, Schedule 80, offers exceptional strength-to-weight ratio and superior corrosion resistance, making it ideal for the most challenging industrial applications.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Pipe Size | 5.7" |
| Outside Diameter | 5.695" |
| Wall Thickness | 0.212" |
A proven choice for industrial professionals, this Titanium Grade 5 (Ti-6Al-4V) seamless pipe features a 5.7" nominal pipe size with a precise 5.695" outside diameter and a robust 0.212" wall thickness, conforming to Schedule 80 specifications. Its high tensile strength (minimum 120 ksi) and excellent fatigue strength, coupled with exceptional resistance to oxidizing acids, chlorides, and seawater, ensure longevity in aggressive media and high-pressure systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper alignment and fit with compatible Schedule 80 fittings. 2. Utilize approved welding procedures and filler materials for titanium alloys. 3. Perform post-weld heat treatment if required by application specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel welding consumables. | Always use titanium-specific welding consumables and procedures to prevent contamination and ensure joint integrity. |
| Inadequate surface preparation before welding. | Thoroughly clean all surfaces to be welded, removing any oxides, oils, or contaminants to prevent porosity and weld defects. |
A: This Seamless Pipe, Schedule 80 is manufactured from Titanium Grade 5.
A: Chemical processing equipment, Aerospace components, Marine environments, High-temperature fluid handling.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||