This Titanium Grade 5 Schedule 80 seamless pipe offers exceptional strength, lightweight properties, and superior corrosion resistance, making it ideal for extreme operational conditions.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Pipe Size | 5.0" |
| Outside Diameter | 5.717" |
| Wall Thickness | 0.142" |
Purpose-built for heavy-duty applications, this 5.0" nominal size seamless pipe features a precise 5.717" outside diameter and a robust 0.142" wall thickness, conforming to Schedule 80 dimensions. Fabricated from Titanium Grade 5 (Ti-6Al-4V), it boasts an unparalleled strength-to-weight ratio, excellent fatigue strength, and outstanding resistance to oxidizing environments, chloride stress corrosion cracking, and a wide spectrum of corrosive media. These attributes make it the material of choice for critical aerospace, marine, chemical processing, and oil & gas applications where reliability under stress is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper pipe alignment and support. 2. Utilize certified welding procedures for Titanium Grade 5. 3. Conduct thorough non-destructive testing (NDT) post-welding.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper joint preparation leading to weld defects. | Thoroughly clean and bevel pipe ends according to welding specifications before joining. |
| Using standard carbon steel welding consumables. | Always use specialized Titanium Grade 5 welding consumables and inert gas shielding. |
A: This Seamless Pipe, Schedule 80 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Marine propulsion and exhaust systems, High-pressure chemical processing lines, Oil and gas downhole equipment, Medical implants.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||