This Titanium Grade 5 Schedule 80 seamless pipe offers exceptional strength and corrosion resistance. Engineered for critical applications where performance and longevity are paramount, it withstands extreme conditions.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Galvanized |
| Grade | N/A |
| Pipe Size | 1.4" |
| Outside Diameter | 3.025" |
| Wall Thickness | 0.476" |
Engineered for reliability and performance, this 1.4" nominal size Schedule 80 seamless pipe is fabricated from Titanium Grade 5 (Ti-6Al-4V), renowned for its superior strength-to-weight ratio and excellent resistance to a wide array of corrosive media, including saltwater, chlorides, and many acids. The precise outside diameter of 3.025" and a substantial wall thickness of 0.476" ensure structural integrity and pressure containment capabilities suitable for high-pressure, high-temperature, and aggressive chemical environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper pipe alignment and support to prevent undue stress. 2. Utilize appropriate welding procedures and filler metals for Titanium Grade 5, typically inert gas shielded arc welding (TIG or MIG). 3. Conduct thorough post-weld inspection and non-destructive testing (NDT) to verify weld integrity and material soundness.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper joint preparation leading to weld defects. | Thoroughly clean and bevel joint surfaces according to industry standards for titanium welding, removing all surface contaminants and oxides. |
| Using incompatible welding consumables. | Employ only certified welding consumables specifically designed for Titanium Grade 5 to ensure optimal mechanical properties and corrosion resistance of the weld. |
A: This Seamless Pipe, Schedule 80 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Chemical processing equipment, Oil and gas exploration, Marine hardware, Biomedical implants.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||