This high-performance industrial O-ring features a Buna-N elastomer sealing surface bonded to a robust Titanium Grade 5 core. Engineered for superior chemical resistance and extreme temperature tolerance, ensuring reliable sealing in critical applications.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 3.577" |
| Outside Diameter | 6.744" |
| Cross Section | 0.180" |
Manufactured under strict quality controls, this industrial O-ring offers exceptional performance characteristics. The Buna-N (Nitrile Butadiene Rubber) provides excellent resistance to oils, fuels, and general chemicals, while the Titanium Grade 5 core (Ti-6Al-4V) imparts exceptional strength, corrosion resistance, and a wide operating temperature range. With an Inside Diameter of 3.577 inches, an Outside Diameter of 6.744 inches, and a Cross Section of 0.180 inches, this seal is designed for precise fitment in demanding fluid power and chemical processing systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove surfaces are clean and free of debris. 2. Carefully lubricate the O-ring with a compatible lubricant if recommended for the application. 3. Gently insert the O-ring into the groove, avoiding excessive stretching or twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible lubricants that degrade Buna-N. | Always verify lubricant compatibility with Buna-N and Titanium Grade 5 for the specific operating conditions. |
| Overstretching or twisting the O-ring during installation. | Install the O-ring smoothly, ensuring it seats properly without undue stress on the elastomer. |
A: This Industrial O-Ring, Buna-N is manufactured from Titanium Grade 5.
A: Aerospace hydraulic systems, Chemical processing equipment, High-pressure fluid power circuits.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||