This industrial O-ring, crafted from resilient Buna-N and featuring a robust Titanium Grade 5 construction, ensures superior sealing performance under demanding conditions. Its precise dimensions guarantee a reliable, leak-proof fit.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 4.436" |
| Outside Diameter | 3.592" |
| Cross Section | 0.225" |
Built to exacting engineering tolerances, this Buna-N O-ring boasts an inside diameter of 4.436 inches, an outside diameter of 3.592 inches, and a cross-section of 0.225 inches. The combination of Buna-N's excellent resistance to oils, fuels, and hydraulic fluids, with the exceptional strength, corrosion resistance, and lightweight properties of Titanium Grade 5, makes this seal ideal for high-pressure, corrosive, and extreme temperature environments. Its robust material composition ensures longevity and dependable sealing in aerospace, automotive, and chemical processing applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean, free of debris, and properly lubricated with a compatible lubricant. 2. Carefully stretch the O-ring over the component, avoiding excessive force or sharp tools. 3. Gently seat the O-ring into the groove, ensuring it is not twisted or pinched.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage or permanent deformation. | Apply lubricant to both the O-ring and the groove. Gently stretch and ease the O-ring into place, using a smooth, rolling motion if necessary. |
| Installing a twisted or pinched O-ring, which compromises seal integrity and leads to premature failure. | Visually inspect the O-ring before and during installation to confirm it is seated evenly and without twists or pinching. |
A: This Industrial O-Ring, Buna-N is manufactured from Titanium Grade 5.
A: Aerospace fluid systems, Automotive fuel and hydraulic lines, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||