This industrial O-ring, crafted from robust Titanium Grade 5, offers unparalleled sealing integrity. Engineered for demanding applications, it ensures reliable performance under extreme conditions.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 9.442" |
| Outside Diameter | 6.198" |
| Cross Section | 0.266" |
Precision-manufactured to tight tolerances, this Titanium Grade 5 O-ring boasts an inside diameter of 9.442", an outside diameter of 6.198", and a cross-section of 0.266". The inherent properties of Titanium Grade 5, including exceptional strength-to-weight ratio, superior corrosion resistance, and high-temperature stability, make this seal ideal for aerospace, chemical processing, and high-pressure hydraulic systems where standard elastomers fail. Its biocompatibility also lends itself to specialized medical equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean, dry, and free of debris or burrs. 2. Carefully lubricate the O-ring with a compatible lubricant to prevent tearing. 3. Install the O-ring into its groove, ensuring it sits flush and is not twisted.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage. | Apply even, moderate pressure and utilize appropriate installation tools if necessary. |
| Incorrect groove design or incorrect O-ring size selection. | Always verify O-ring and groove dimensions against application specifications and consult dimensional charts. |
A: This Industrial O-Ring, Silicone is manufactured from Titanium Grade 5.
A: Aerospace fluid systems, High-pressure chemical reactors, Cryogenic applications, Medical implantable devices.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||