This industrial O-ring, constructed from premium Titanium Grade 5, offers exceptional strength and corrosion resistance. Designed for demanding sealing applications where reliability is paramount.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 0.947" |
| Outside Diameter | 10.077" |
| Cross Section | 0.160" |
Engineered for reliability and performance, this industrial O-ring boasts a precise Inside Diameter of 0.947", an Outside Diameter of 10.077", and a Cross Section of 0.160". Fabricated from Titanium Grade 5 (Ti-6Al-4V), it provides superior tensile strength, excellent fatigue resistance, and outstanding corrosion immunity, especially in harsh chemical and high-temperature environments. This material's biocompatibility also lends itself to specialized applications in medical and aerospace industries, ensuring leak-free operation under extreme pressure and temperature fluctuations.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Visually inspect the groove and O-ring for damage or debris. 2. Lubricate the O-ring and groove with a compatible lubricant. 3. Carefully install the O-ring into the designated groove, ensuring it is seated properly without twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Installing a dry O-ring, leading to tearing or premature wear. | Always use a compatible lubricant to reduce friction during installation and operation. |
| Twisting the O-ring during installation, causing seal failure. | Ensure the O-ring is seated squarely and uniformly around the groove without any distortion. |
A: This Industrial O-Ring, Silicone is manufactured from Titanium Grade 5.
A: High-pressure hydraulic systems, Aerospace fluid connectors, Corrosive chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||