This industrial O-ring, crafted from Grade 5 Titanium, delivers exceptional sealing performance under extreme temperatures and corrosive conditions. Engineered for reliability in demanding environments.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 1.777" |
| Outside Diameter | 3.420" |
| Cross Section | 0.245" |
Purpose-built for heavy-duty applications, this O-ring is manufactured from high-strength, biocompatible Titanium Grade 5 alloy (Ti-6Al-4V). Its precise dimensions of 1.777" Inside Diameter, 3.420" Outside Diameter, and 0.245" Cross Section ensure a robust seal in critical fluid and gas systems. Titanium Grade 5 offers outstanding corrosion resistance, high tensile strength, and low density, making it ideal for aerospace, medical, and chemical processing industries where performance and longevity are paramount. Operating temperature range: -200°C to +400°C. Pressure rating: Up to 5000 psi (dependent on groove design and application).
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean, free of debris, and properly lubricated with a compatible lubricant. 2. Carefully stretch the O-ring over the component, avoiding sharp tools or excessive force that could nick or cut the sealing surface. 3. Gently seat the O-ring into the groove, ensuring it is not twisted or pinched during assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a dry O-ring during installation. | Apply a thin layer of compatible lubricant to the O-ring and groove to facilitate installation and prevent damage. |
| Twisting or overstretching the O-ring. | Install the O-ring by carefully stretching it just enough to clear the component and then allowing it to seat naturally into the groove. |
| Using the wrong lubricant or cleaning agent. | Always consult compatibility charts to ensure lubricants and cleaning agents are compatible with Titanium Grade 5 and the media being sealed. |
A: This Industrial O-Ring, Silicone is manufactured from Titanium Grade 5.
A: Aerospace hydraulic systems, High-temperature chemical reactors, Medical implantable devices, Subsea oil and gas equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||