This M22x47mm Hex Head Cap Screw, crafted from aerospace-grade Titanium Grade 5, offers exceptional strength-to-weight ratio and superior corrosion resistance for critical applications.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Zinc Plated |
| Grade | N/A |
| Size | M22 |
| Length | 47mm |
| Head Width | 18mm |
A high-performance industrial component, this M22x47mm Hex Head Cap Screw is manufactured from Titanium Grade 5 (Ti-6Al-4V), renowned for its excellent tensile strength and fatigue resistance, approaching that of steel while being nearly half the weight. The M22 nominal diameter and 47mm length provide significant engagement in threaded holes, while the 18mm hex head ensures secure torque application with standard tooling. Its inherent passivation layer makes it highly resistant to various corrosive media, ideal for aerospace, medical, chemical processing, and marine environments where reliability is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threaded hole is clean and free of debris. Verify thread compatibility. 2. Apply a suitable lubricant or anti-seize compound to the threads if recommended for the specific application to prevent galling. 3. Hand-thread the cap screw to start engagement, ensuring it threads smoothly. Do not force. 4. Using a calibrated torque wrench, tighten the cap screw to the manufacturer's specified torque value for Titanium Grade 5 fasteners, following a proper tightening sequence if multiple fasteners are used.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M22 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M22 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening, leading to thread stripping or fastener yielding. | Always use a calibrated torque wrench and adhere to manufacturer-specified torque values for Titanium Grade 5 fasteners. |
| Galling (cold welding) of titanium threads during installation. | Apply a specialized anti-seize compound or lubricant specifically designed for titanium fasteners before installation. Hand-thread initially to ensure proper engagement. |
| Using standard steel lubricants or thread compounds that can react with titanium. | Only use lubricants and anti-seize compounds compatible with titanium alloys to prevent premature corrosion or bond failure. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural components and engine assemblies, Medical implants and surgical instruments, High-performance automotive and motorsport applications, Chemical processing equipment and pipelines, Marine hardware and offshore structures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||