This Hex Head Cap Screw, crafted from aerospace-grade Titanium Grade 5, offers exceptional strength-to-weight ratio and superior corrosion resistance for demanding industrial and aerospace applications.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Size | M22 |
| Length | 20mm |
| Head Width | 9mm |
Specified by design engineers worldwide, this M22 x 20mm Hex Head Cap Screw is manufactured from Titanium Grade 5 (Ti-6Al-4V). This alloy provides an unparalleled combination of high tensile strength (950 MPa minimum), excellent fatigue strength, and exceptional resistance to saltwater and various chemical environments, making it ideal for aerospace, marine, medical implants, and high-performance automotive sectors. The nominal head width of 9mm ensures compatibility with standard M22 tooling, facilitating secure and precise installation.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free of debris. 2. Apply a suitable lubricant if required by the application to prevent galling. 3. Tighten the cap screw to the specified torque using a calibrated torque wrench.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M22 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M22 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-torquing leading to thread stripping or fastener fracture. | Always adhere to the manufacturer's or engineering design's specified torque values and use a calibrated torque wrench. |
| Galling of titanium threads during installation. | Use a quality anti-seize lubricant specifically designed for titanium or stainless steel fasteners. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Marine hardware and offshore equipment, Medical implants and surgical instruments, High-performance automotive systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||