Engineered from aerospace-grade Titanium Grade 5, this M19x105mm hex head cap screw offers superior strength-to-weight ratio and exceptional corrosion resistance. Its robust design ensures secure fastening in demanding environments.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Zinc Plated |
| Grade | N/A |
| Size | M19 |
| Length | 105mm |
| Head Width | 27mm |
Engineered for reliability and performance, this M19x105mm hex head cap screw is manufactured from premium Titanium Grade 5 (Ti-6Al-4V), renowned for its excellent tensile strength (up to 950 MPa), fatigue resistance, and biocompatibility. The M19 thread size ensures substantial load-bearing capacity, while the 105mm length provides ample engagement for various assembly needs. The 27mm hex head offers optimal torque transfer during installation. Its inherent resistance to saltwater, chemicals, and high temperatures makes it ideal for critical applications where material integrity is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free of debris. 2. Apply appropriate lubricant if required by the application to prevent galling, especially in titanium-to-titanium connections. 3. Tighten the cap screw to the manufacturer-specified torque using a calibrated torque wrench to avoid over or under-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M19 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M19 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Galling during installation due to insufficient lubrication or cross-threading. | Always use a suitable anti-seize compound or lubricant specifically designed for titanium. Ensure proper alignment before starting to thread and avoid forcing the screw. |
| Over-tightening, leading to thread stripping or fastener fatigue. | Utilize a calibrated torque wrench and adhere to recommended torque values for Titanium Grade 5 fasteners of this size and thread pitch. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, Marine and offshore equipment, High-performance automotive assemblies, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||