This M17x68mm Hex Head Cap Screw, forged from aerospace-grade Titanium Grade 5, offers exceptional strength-to-weight ratio and superior corrosion resistance. Engineered for critical fastening in harsh environments.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Size | M17 |
| Length | 68mm |
| Head Width | 11mm |
Engineered for reliability and performance, this M17x68mm Hex Head Cap Screw boasts a nominal diameter of M17 and a length of 68mm, with a precision-machined 11mm head width. Manufactured from Titanium Grade 5 (Ti-6Al-4V), it exhibits an impressive tensile strength exceeding 895 MPa and exceptional resistance to fatigue and corrosion, making it ideal for demanding aerospace, marine, and medical implant applications where weight reduction and long-term durability are paramount. Its biocompatibility further extends its utility.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free of debris. 2. Apply a suitable thread lubricant if recommended for the application. 3. Tighten the screw to the specified torque using a calibrated torque wrench, ensuring the wrench engages the hex head fully.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M17 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M17 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening, leading to thread stripping or fastener fracture. | Always adhere to the manufacturer's specified torque values and use a calibrated torque wrench. |
| Using incompatible lubricants or thread lockers that can degrade titanium. | Consult material compatibility charts or the fastener manufacturer for appropriate lubricants and thread locking compounds. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Marine hardware and equipment, Medical implants and surgical instruments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||