Engineered from aerospace-grade Titanium Grade 5, this M14x48mm hex head cap screw offers superior strength-to-weight ratio and exceptional corrosion resistance for critical fastening applications.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Size | M14 |
| Length | 48mm |
| Head Width | 18mm |
Manufactured under strict quality controls, this M14x48mm hex head cap screw is forged from Titanium Grade 5 (Ti-6Al-4V), renowned for its excellent biocompatibility, high tensile strength (up to 950 MPa), and remarkable resistance to corrosion in aggressive environments. The nominal head width is 18mm, ensuring compatibility with standard tooling. This fastener's light weight, combined with its robust mechanical properties, makes it an ideal choice for weight-sensitive assemblies and applications requiring long-term reliability under stress and environmental exposure.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free from debris. 2. Apply a small amount of anti-seize compound to the threads to prevent galling. 3. Tighten the screw to the recommended torque specification for M14 fasteners, typically around 70-90 Nm, using a calibrated torque wrench.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M14 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M14 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-torquing the titanium screw, which can lead to thread stripping or material deformation. | Always use a calibrated torque wrench and adhere to specified torque values for titanium fasteners. |
| Not using an anti-seize compound, increasing the risk of galling between the titanium screw and the mating material. | Apply a suitable anti-seize compound specifically designed for titanium fasteners before installation. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, High-performance automotive assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||