Engineered for ultimate performance, this M13x107mm Titanium Grade 5 Hex Cap Screw offers exceptional strength-to-weight ratio and superior corrosion resistance for critical fastening needs.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Size | M13 |
| Length | 107mm |
| Head Width | 22mm |
Built to exacting engineering tolerances, this Hex Head Cap Screw is manufactured from Titanium Grade 5 (Ti-6Al-4V), renowned for its excellent mechanical properties and biocompatibility. The M13 nominal diameter, 107mm length, and 22mm head width ensure precise fitment in high-stress environments. Grade 5 titanium offers a tensile strength of approximately 895 MPa and a yield strength of 827 MPa, making it ideal for aerospace, medical implants, and marine applications where weight reduction and extreme durability are paramount. Its inherent resistance to galvanic corrosion and saltwater environments further enhances its suitability for harsh operational conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free from debris. 2. Apply a suitable lubricant or anti-seize compound to the threads if recommended for the specific application. 3. Thread the cap screw by hand to avoid cross-threading. 4. Torque the fastener to the manufacturer's specified value using a calibrated torque wrench, ensuring the head is fully seated.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M13 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M13 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force or improper tools, potentially damaging the titanium threads. | Always use a calibrated torque wrench and ensure proper socket engagement to prevent stripping or galling. |
| Reusing titanium fasteners in critical applications without proper inspection. | Inspect titanium fasteners for any signs of wear, deformation, or damage before reinstallation. Consider replacement for critical components. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural components, High-performance automotive assemblies, Marine and offshore equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||