This industrial O-ring, constructed from robust Titanium Grade 5, offers exceptional strength and corrosion resistance. Engineered for critical sealing in extreme environments, it ensures reliable performance and longevity.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 5.821" |
| Outside Diameter | 4.815" |
| Cross Section | 0.074" |
Trusted by engineers across multiple sectors, this industrial O-ring is meticulously fabricated from Titanium Grade 5, renowned for its superior strength-to-weight ratio and exceptional resistance to corrosion and chemical attack. With an inside diameter of 5.821 inches, an outside diameter of 4.815 inches, and a precise cross-section of 0.074 inches, it meets exacting dimensional tolerances for optimal sealing performance. Its inherent biocompatibility and high-temperature capabilities make it ideal for aerospace, medical, and demanding chemical processing applications where material integrity is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating groove and O-ring surfaces are clean and free from debris. 2. Carefully position the O-ring within the groove, avoiding excessive stretching or twisting. 3. Apply a light, compatible lubricant if necessary to facilitate installation and prevent damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage. | Apply gentle pressure and utilize appropriate tools if needed to avoid overstretching or pinching the O-ring. |
| Installing on a contaminated or damaged groove surface. | Thoroughly inspect and clean the groove before installation to ensure a proper seal and prevent premature failure. |
A: This Industrial O-Ring, Silicone is manufactured from Titanium Grade 5.
A: Aerospace fluid and gas systems, High-purity chemical processing, Medical device sealing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||