This high-performance industrial O-ring is engineered from Titanium Grade 5, offering exceptional strength and corrosion resistance for demanding applications. Its precise dimensions ensure a reliable seal in challenging environments.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 3.495" |
| Outside Diameter | 1.617" |
| Cross Section | 0.231" |
Built to exacting engineering tolerances, this industrial O-ring boasts an Inside Diameter of 3.495 inches, an Outside Diameter of 1.617 inches, and a precise Cross Section of 0.231 inches. Constructed from Titanium Grade 5, it exhibits superior tensile strength, excellent fatigue resistance, and exceptional inertness to a wide range of corrosive media and extreme temperatures, making it ideal for aerospace, medical, and chemical processing industries where material integrity is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure sealing surfaces are clean, dry, and free from burrs or debris. 2. Carefully lubricate the O-ring with a compatible lubricant to prevent damage during installation. 3. Gently stretch and place the O-ring into its groove, ensuring it is seated evenly without twisting or excessive stretching.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring nicks or tears. | Apply a compatible lubricant and utilize appropriate installation tools if necessary, ensuring a controlled and gentle placement. |
| Incorrect O-ring groove preparation, leaving sharp edges that can damage the seal. | Thoroughly inspect and deburr all groove edges before installation. Smooth surfaces are critical for proper sealing. |
A: This Industrial O-Ring, Silicone is manufactured from Titanium Grade 5.
A: High-temperature fluid handling systems, Corrosive chemical processing equipment, Aerospace hydraulic and pneumatic actuators.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||