Engineered from high-strength Titanium Grade 5, this M23x69mm hex head cap screw offers exceptional corrosion resistance and a superior strength-to-weight ratio, ideal for critical applications.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Size | M23 |
| Length | 69mm |
| Head Width | 34mm |
Trusted by engineers across multiple sectors, this Hex Head Cap Screw is meticulously manufactured from Titanium Grade 5 (Ti-6Al-4V), renowned for its excellent biocompatibility, high tensile strength, and superior corrosion resistance in aggressive environments. With a nominal size of M23, a length of 69mm, and a head width of 34mm, it ensures robust fastening in aerospace, medical implants, chemical processing, and marine applications where material integrity and longevity are paramount. Its precise machining guarantees consistent performance and reliable load bearing.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure both mating surfaces are clean and free from debris or lubricants that could affect torque values. 2. Apply a small amount of anti-seize compound suitable for titanium to the threads to prevent galling. 3. Tighten the cap screw to the specified torque using a calibrated torque wrench, following a star pattern for multiple fasteners.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M23 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M23 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel torque values for titanium fasteners. | Always consult torque charts specific to titanium Grade 5 fasteners and the mating material to prevent over-tightening or under-tightening. |
| Not using an anti-seize compound, leading to galling. | Apply a thin, even layer of a compatible anti-seize compound to the threads to facilitate smooth installation and prevent seizing. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, High-performance automotive and marine systems, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||