Engineered from aerospace-grade Titanium Grade 5, this M23x70mm hex head cap screw offers exceptional strength-to-weight ratio and superior corrosion resistance for critical applications.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Size | M23 |
| Length | 70mm |
| Head Width | 20mm |
Trusted by engineers across multiple sectors, this M23x70mm hex head cap screw is manufactured from Titanium Grade 5 (Ti-6Al-4V), renowned for its excellent mechanical properties including high tensile strength, low density, and superb corrosion resistance in harsh environments. The M23 nominal diameter, 70mm length, and 20mm head width ensure precise fitment and load distribution. This fastener is ideal for applications demanding reliability and longevity, such as in aerospace structural components, medical implants, marine hardware, and high-performance automotive assemblies.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free of debris. 2. Apply a suitable anti-seize compound if required for the application. 3. Tighten the cap screw to the manufacturer's specified torque using a calibrated torque wrench.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M23 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M23 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the fastener, leading to thread stripping or component damage. | Always use a calibrated torque wrench and adhere to specified torque values for the application and materials being joined. |
| Using the wrong thread engagement length, compromising joint security. | Verify that the mating thread engagement is sufficient to achieve the required clamping force according to engineering standards. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and devices, Marine hardware and subsea equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||