Engineered for superior performance, this M11x127mm Hex Head Cap Screw is crafted from aerospace-grade Titanium Grade 5 (Ti-6Al-4V). Offering exceptional strength-to-weight ratio and unparalleled corrosion resistance, it ensures lasting reliability in critical applications.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Size | M11 |
| Length | 127mm |
| Head Width | 36mm |
Specified by design engineers worldwide, this M11x127mm Hex Head Cap Screw is manufactured from Titanium Grade 5 (Ti-6Al-4V), a high-performance alloy renowned for its excellent tensile strength, fatigue resistance, and biocompatibility. With a nominal diameter of M11, a substantial length of 127mm, and a broad 36mm hex head for optimal torque application, it is ideally suited for applications demanding extreme durability and resistance to aggressive environments, including aerospace, medical implants, and high-performance automotive systems. Its inherent lightweight nature further enhances its suitability for weight-sensitive designs.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free from debris. 2. Apply a suitable lubricant or anti-seize compound if recommended for the specific application. 3. Hand-thread the screw to prevent cross-threading. 4. Torque the screw to the manufacturer's specified value using a calibrated torque wrench, ensuring even tightening across multiple fasteners.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M11 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M11 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-torquing the fastener, which can lead to thread stripping or material fatigue. | Always use a calibrated torque wrench and adhere to specified torque values for the application. |
| Using incompatible lubricants or anti-seize compounds that may react with titanium. | Consult material compatibility charts or the fastener manufacturer's recommendations for appropriate lubricants. |
| Attempting to force a misaligned screw, risking damage to both the screw and the tapped hole. | Ensure proper alignment before starting to thread; if resistance is met, back out and re-align. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, High-performance automotive and motorsport assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||