This Grade 5 Titanium deep groove ball bearing is engineered for extreme duty. Its exceptional strength-to-weight ratio and superior corrosion resistance make it ideal for the most demanding power transmission systems.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 97mm |
| Outside Diameter | 75mm |
| Width | 43mm |
Purpose-built for heavy-duty applications, this deep groove ball bearing features a precision-machined 97mm inside diameter, 75mm outside diameter, and 43mm width. Constructed from aerospace-grade Titanium Grade 5, it offers unparalleled strength, exceptional corrosion resistance against aggressive media, and a significantly lower density than steel alternatives, reducing inertial loads and enhancing operational efficiency. This makes it ideal for high-performance, critical applications in aerospace, marine, and chemical processing industries where reliability under extreme conditions is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure bearing seating surfaces are clean, free of debris, and within specified tolerances. 2. Apply a light film of compatible lubricant to both the shaft and bearing bore. 3. Carefully press the bearing onto the shaft using a bearing press or induction heater, ensuring even pressure and avoiding impact.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper lubrication selection or application. | Consult the bearing manufacturer's specifications for the correct lubricant type and viscosity for the intended operating environment and load conditions. Ensure uniform and adequate lubrication. |
| Applying excessive force during installation, leading to brinelling. | Use a proper bearing press or induction heater for installation. Apply force only to the race that is being fitted. Never hammer the bearing directly. |
A: This Deep Groove Ball Bearing is manufactured from Titanium Grade 5.
A: Aerospace Actuation Systems, High-Speed Marine Propulsion, Corrosive Chemical Processing Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||