This Deep Groove Ball Bearing, crafted from aerospace-grade Titanium Grade 5, offers exceptional strength-to-weight ratio and superior corrosion resistance for critical power transmission systems.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 93mm |
| Outside Diameter | 110mm |
| Width | 44mm |
Manufactured under strict quality controls, this bearing features an inside diameter of 93mm, an outside diameter of 110mm, and a width of 44mm. The use of Titanium Grade 5 (Ti-6Al-4V) provides an outstanding combination of high tensile strength, low density, and excellent resistance to aggressive environments, including saltwater and many chemicals. This material selection ensures prolonged service life and reduced operational load in applications where weight reduction and material integrity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure bearing seating surfaces are clean and free of debris. 2. Carefully press the bearing onto the shaft using a calibrated bearing heater or press, applying force only to the inner ring. 3. Verify smooth rotation and proper seating within the housing.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force to the outer ring during shaft mounting. | Always apply mounting force exclusively to the inner ring when installing on the shaft to prevent internal damage. |
| Contamination of bearing raceways or rolling elements. | Handle bearings in a clean environment and keep them in their original packaging until installation. |
A: This Deep Groove Ball Bearing is manufactured from Titanium Grade 5.
A: Aerospace Actuation Systems, High-Performance Automotive Drivetrains, Corrosive Chemical Processing Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||