This high-performance deep groove ball bearing, crafted from aerospace-grade Titanium Grade 5, delivers exceptional strength, corrosion resistance, and reduced weight for critical power transmission systems.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 91mm |
| Outside Diameter | 100mm |
| Width | 41mm |
Engineered for reliability and performance, this deep groove ball bearing features an inside diameter of 91mm, an outside diameter of 100mm, and a width of 41mm. Constructed from Titanium Grade 5 (Ti-6Al-4V), it offers a superior strength-to-weight ratio, excellent corrosion resistance in aggressive environments, and non-magnetic properties. Its design allows for high rotational speeds and accommodates both radial and axial loads, making it suitable for applications demanding reduced inertia and enhanced durability. The advanced material composition ensures operational integrity under extreme conditions and extended service life.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure bearing seating surfaces are clean, free from debris, and within specified tolerances. 2. Apply a thin, even layer of appropriate lubricant to the raceways and rolling elements. 3. Carefully press the bearing onto the shaft or into the housing, ensuring uniform pressure and alignment. Avoid hammering directly on the bearing races.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, leading to brinelling or race distortion. | Use a proper bearing press or induction heater for installation, applying force only to the ring being fitted. |
| Contaminating the bearing during handling and installation. | Keep the bearing in its original packaging until installation and handle with clean, lint-free gloves. |
A: This Deep Groove Ball Bearing is manufactured from Titanium Grade 5.
A: Aerospace Actuation Systems, High-Speed Industrial Machinery, Corrosive Environment Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||