Engineered from aerospace-grade Titanium Grade 5, this deep groove ball bearing offers exceptional strength-to-weight ratio and superior corrosion resistance for critical power transmission applications.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 90mm |
| Outside Diameter | 50mm |
| Width | 26mm |
Designed for demanding industrial environments, this deep groove ball bearing boasts an Inside Diameter of 90mm and an Outside Diameter of 50mm, with a Width of 26mm. Constructed from Titanium Grade 5, it exhibits excellent tensile strength, fatigue resistance, and superior performance in corrosive media, high temperatures, and vacuum conditions. Its lightweight nature makes it ideal for applications where weight reduction is paramount, without compromising load-carrying capacity. This bearing is engineered to deliver reliable, low-friction rotation under extreme operational stresses.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure bearing and shaft surfaces are clean and free from debris. 2. Carefully press the bearing onto the shaft using a suitable arbor press or induction heater, applying even pressure to the inner ring. 3. Install the bearing into the housing, ensuring proper seating and alignment, and secure with retaining rings or other specified methods.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the outer ring during shaft mounting. | Always apply mounting force exclusively to the inner ring when installing onto the shaft to prevent brinelling and premature bearing failure. |
| Insufficient lubrication or use of incompatible lubricants. | Ensure the bearing is adequately lubricated with a high-quality, compatible grease or oil specified for Titanium Grade 5 bearings and the operating environment. |
A: This Deep Groove Ball Bearing is manufactured from Titanium Grade 5.
A: Aerospace Actuation Systems, Marine Propulsion Systems, High-Performance Industrial Gearboxes, Corrosive Chemical Processing Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||