Engineered from aerospace-grade Titanium Grade 5, this deep groove ball bearing offers exceptional strength-to-weight ratio and superior corrosion resistance. Ideal for extreme environments.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 85mm |
| Outside Diameter | 38mm |
| Width | 31mm |
Specified by design engineers worldwide, this deep groove ball bearing (85mm ID, 38mm OD, 31mm Width) is precision-manufactured from Titanium Grade 5 (Ti-6Al-4V). This alloy provides outstanding tensile strength, fatigue resistance, and exceptional immunity to a wide range of corrosive media, including saltwater and many industrial chemicals. Its lightweight nature makes it critical for aerospace, marine, and medical equipment where weight reduction is paramount without compromising performance. The robust design ensures reliable operation under high loads and challenging operating conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seat and shaft are clean and free of debris. 2. Carefully press the bearing onto the shaft or into the housing, applying even force to the correct ring (inner for shaft, outer for housing). 3. Verify smooth rotation and proper seating before final assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the wrong ring during installation. | Always apply installation force to the ring being pressed onto its mating part (inner ring to shaft, outer ring to housing). |
| Contaminating the bearing surfaces during handling or installation. | Handle bearings in a clean environment and avoid touching raceways or rolling elements directly. Use appropriate tools. |
A: This Deep Groove Ball Bearing is manufactured from Titanium Grade 5.
A: Aerospace Actuation Systems, Marine Propulsion Components, Medical Devices and Robotics, Chemical Processing Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||