Engineered for extreme environments, this Deep Groove Ball Bearing utilizes aerospace-grade Titanium Grade 5. It offers superior corrosion resistance and lightweight strength, ensuring reliable performance in challenging power transmission applications.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 85mm |
| Outside Diameter | 29mm |
| Width | 27mm |
Manufactured under strict quality controls, this Deep Groove Ball Bearing boasts an 85mm inside diameter, a 29mm outside diameter, and a 27mm width. Constructed from Titanium Grade 5 (Ti-6Al-4V), it exhibits exceptional strength-to-weight ratio and unparalleled resistance to corrosive media, including saltwater and various chemicals. This material also offers excellent biocompatibility and non-magnetic properties. Its precise geometry and tight tolerances ensure smooth operation and extended service life in high-stress power transmission systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing housing and shaft are clean and free from debris. 2. Carefully mount the bearing onto the shaft, applying even pressure to the inner ring. 3. Secure the bearing within the housing, ensuring proper fit and alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cleaning of mounting surfaces, leading to contamination. | Thoroughly clean all mounting surfaces and tools before installation to prevent debris ingress. |
| Applying force to the outer ring when mounting on the shaft, causing brinelling. | Always apply mounting force exclusively to the inner ring when installing on the shaft, or to the outer ring when pressing into the housing. |
A: This Deep Groove Ball Bearing is manufactured from Titanium Grade 5.
A: Aerospace power transmission systems, Marine propulsion and auxiliary equipment, Chemical processing equipment, Medical device components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||