This deep groove ball bearing, crafted from aerospace-grade Titanium Grade 5, delivers exceptional performance and durability. Its precise dimensions and advanced material properties make it ideal for demanding power transmission applications.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 84mm |
| Outside Diameter | 120mm |
| Width | 31mm |
Built to exacting engineering tolerances, this deep groove ball bearing features an 84mm inside diameter, a 120mm outside diameter, and a 31mm width. Fabricated from Titanium Grade 5 alloy, it provides an unparalleled strength-to-weight ratio, exceptional corrosion resistance against aggressive media, and excellent thermal stability. These characteristics make it the superior choice for applications requiring high reliability in harsh chemical, marine, or aerospace environments, and where reduced mass is critical for overall system efficiency and performance optimization.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure bearing seating surfaces are clean, free from debris, and within specified tolerances. 2. Apply a thin, uniform layer of approved lubricant to the inner and outer raceways. 3. Carefully press the bearing onto the shaft (inner ring) or into the housing (outer ring) using a suitable press or induction heater, ensuring even force application.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cleaning of mounting surfaces leading to contamination. | Thoroughly clean all mounting surfaces with a lint-free cloth and approved solvent before installation. |
| Uneven or excessive force during press-fitting, causing brinelling or damage. | Utilize a calibrated press with appropriate tooling that contacts only the ring being fitted, ensuring even force distribution. |
A: This Deep Groove Ball Bearing is manufactured from Titanium Grade 5.
A: Aerospace Actuation Systems, High-Performance Marine Equipment, Chemical Processing Machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||