Engineered from aerospace-grade Titanium Grade 5, this deep groove ball bearing delivers exceptional performance in corrosive environments and high-stress power transmission systems. Its robust construction ensures reliable operation and extended service life.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 83mm |
| Outside Diameter | 27mm |
| Width | 28mm |
Precision-manufactured to tight tolerances, this deep groove ball bearing features an inside diameter of 83mm, an outside diameter of 27mm, and a width of 28mm. Constructed from Titanium Grade 5, it provides an unparalleled combination of high strength-to-weight ratio, exceptional corrosion resistance (including against saltwater and most chemicals), and excellent biocompatibility. These attributes make it ideal for applications where traditional steel bearings would fail or require frequent replacement. The material's inherent strength allows for operation under significant radial and axial loads, making it suitable for environments demanding both durability and reduced mass.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seating surfaces on the shaft and housing are clean, free of burrs, and dimensionally accurate. 2. Apply a thin, uniform layer of appropriate bearing lubricant to the shaft and the inner ring of the bearing. 3. Carefully press the bearing onto the shaft, applying force to the inner ring only, until it is fully seated.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the outer ring during shaft mounting. | Always apply mounting force exclusively to the inner ring when installing on a shaft to prevent brinelling and damage to the raceways. |
| Contamination of the bearing during installation. | Handle the bearing with clean hands or tools and install in a clean environment to prevent ingress of dirt or debris, which can cause premature failure. |
A: This Deep Groove Ball Bearing is manufactured from Titanium Grade 5.
A: Aerospace power transmission systems, Marine equipment, Chemical processing machinery, High-performance automotive components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||