Engineered for extreme environments, this Titanium Grade 5 deep groove ball bearing offers exceptional corrosion resistance, reduced weight, and superior strength for critical power transmission systems.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 82mm |
| Outside Diameter | 50mm |
| Width | 9mm |
A proven choice for industrial professionals, this deep groove ball bearing boasts an 82mm inside diameter and a 50mm outside diameter, with a 9mm width, ensuring precise fitment in standard housings. Constructed from Titanium Grade 5 (Ti-6Al-4V), it exhibits an exceptional strength-to-weight ratio, remarkable corrosion resistance against aggressive media, and is non-magnetic. These properties make it ideal for applications in aerospace, chemical processing, medical equipment, and high-performance automotive systems where conventional steel bearings would fail. The Grade 5 alloy ensures operational integrity under demanding thermal and chemical conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing housing and shaft are clean and free of debris. 2. Carefully align the bearing with the shaft and housing, applying even pressure to avoid tilting. 3. Use appropriate tooling to press the bearing onto the shaft or into the housing, ensuring it seats fully and squarely.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force or uneven pressure during installation. | Utilize a bearing press or induction heater for controlled and even force application, preventing brinelling or distortion. |
| Incorrect lubrication or contamination of the bearing surfaces. | Use specified high-quality lubricants and ensure a clean environment during installation to prevent premature wear or seizure. |
A: This Deep Groove Ball Bearing is manufactured from Titanium Grade 5.
A: Aerospace Actuation Systems, Chemical Pump Shafts, High-Speed Motor Spindles, Medical Device Robotics.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||