This Grade 5 Titanium deep groove ball bearing offers exceptional strength-to-weight ratio and superior corrosion resistance. Engineered for critical power transmission in harsh environments where standard steel fails.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 77mm |
| Outside Diameter | 32mm |
| Width | 40mm |
A high-performance industrial component, this deep groove ball bearing is precision-machined from aerospace-grade Titanium Grade 5 (Ti-6Al-4V). Featuring an inner diameter of 77mm, an outer diameter of 32mm, and a width of 40mm, its exceptional material properties provide unparalleled resistance to corrosion, high temperatures, and chemical attack. This makes it ideal for applications demanding lightweight strength and long-term reliability under extreme operating conditions, such as in marine environments, aerospace, or chemical processing equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seating surfaces on the shaft and housing are clean and free from debris. 2. Carefully align the bearing with the shaft and apply even, controlled pressure for insertion. 3. Once seated on the shaft, install the bearing into the housing, again ensuring proper alignment and even pressure.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cleaning of mating surfaces leading to premature wear. | Thoroughly clean both the shaft and housing bore before bearing installation using an appropriate solvent. |
| Applying excessive or uneven force during installation, causing brinelling or cage damage. | Utilize a bearing press or an induction heater for controlled installation, ensuring force is applied to the correct ring of the bearing. |
A: This Deep Groove Ball Bearing is manufactured from Titanium Grade 5.
A: Aerospace Actuators, Marine Propulsion Systems, Chemical Processing Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||