This high-performance deep groove ball bearing, constructed from aerospace-grade Titanium Grade 5, offers exceptional corrosion resistance and high-temperature capability for demanding power transmission systems.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 73mm |
| Outside Diameter | 55mm |
| Width | 47mm |
Built to exacting engineering tolerances, this deep groove ball bearing boasts an inside diameter of 73mm, an outside diameter of 55mm, and a width of 47mm. The use of Titanium Grade 5 (Ti-6Al-4V) provides superior strength-to-weight ratio, excellent resistance to a wide range of corrosive media including saltwater and many acids, and maintains structural integrity at elevated temperatures. Its robust design ensures smooth, low-friction operation and extended service life in applications where traditional steel bearings would fail prematurely due to environmental factors or thermal stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure bearing mating surfaces are clean and free from debris. 2. Carefully press the bearing onto the shaft or into the housing, applying even pressure to the correct race. 3. Verify proper seating and smooth rotation before applying load.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the wrong race during installation. | Always apply installation force to the ring that is being pressed onto its mating part (e.g., inner ring onto the shaft). |
| Contaminating the bearing during handling. | Handle bearings in a clean environment and keep them sealed in their packaging until immediately before installation. |
A: This Deep Groove Ball Bearing is manufactured from Titanium Grade 5.
A: Aerospace Actuation Systems, Chemical Processing Equipment, Marine Power Transmission, High-Temperature Industrial Machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||