This deep groove ball bearing, constructed from aerospace-grade Titanium Grade 5, offers exceptional corrosion resistance and high-temperature performance, ensuring reliability in demanding power transmission systems.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 72mm |
| Outside Diameter | 26mm |
| Width | 18mm |
Specified by design engineers worldwide, this Grade 5 Titanium deep groove ball bearing features precise dimensions of 72mm inside diameter, 26mm outside diameter, and 18mm width. The inherent properties of Ti-6Al-4V alloy, including its high strength-to-weight ratio, superior corrosion resistance in aggressive media, and excellent performance at elevated temperatures (up to 600°C), make it the optimal choice for critical applications where traditional steel bearings would fail. Its robust design facilitates smooth, low-friction rotation under significant radial and axial loads.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing housing and shaft are clean and free from debris. 2. Carefully press the bearing onto the shaft, applying even pressure to the inner ring. 3. Mount the shaft assembly into the housing, verifying smooth rotation without binding.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the outer ring during shaft mounting. | Always apply installation force exclusively to the inner ring when mounting onto the shaft to prevent brinelling and damage to the raceways. |
| Using excessive heat for installation without proper thermal management. | If induction heating is required, control the temperature precisely to avoid compromising the material properties of the Grade 5 Titanium. |
A: This Deep Groove Ball Bearing is manufactured from Titanium Grade 5.
A: Aerospace actuation systems, Chemical processing equipment, High-temperature industrial machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||