This deep groove ball bearing, crafted from Titanium Grade 5, offers superior corrosion resistance and lightweight strength. Engineered for precision and longevity in demanding environments, it ensures reliable power transmission.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 90mm |
| Outside Diameter | 101mm |
| Width | 46mm |
Built to exacting engineering tolerances, this deep groove ball bearing features an inside diameter of 90mm, an outside diameter of 101mm, and a width of 46mm. Constructed from Titanium Grade 5, it exhibits exceptional strength-to-weight ratio, superior corrosion resistance against aggressive media, and excellent performance at elevated temperatures. Ideal for aerospace, medical equipment, and chemical processing industries where extreme conditions and minimal weight are critical.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure bearing seating surfaces are clean and free of debris. 2. Apply a thin, even layer of appropriate lubricant to the bearing bore and shaft. 3. Carefully press or drive the bearing onto the shaft, ensuring it is fully seated and square.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper lubrication selection for the operating environment. | Consult lubricant compatibility charts for Titanium Grade 5 bearings in specific chemical or temperature conditions. |
| Applying excessive force during installation, leading to brinelling. | Utilize a controlled press or induction heater for installation, ensuring even pressure distribution. |
A: This Deep Groove Ball Bearing is manufactured from Titanium Grade 5.
A: Aerospace Actuation Systems, Medical Imaging Equipment, Chemical Processing Pumps.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||